Micromax Canvas A1 Android One Unlock Boot Loader Update Lollipop Manually

Micromax Canvas A1 Android One Unlock Boot Loader Update Lollipop Manually

Micromax Canvas A1 Lollipop


Disclaimer:  We Have Not Responsible, If You Brick Your Phone Or SD Card Dead Or Your Phone Is Not Working Properly. It Is Your Own Responsibility And Your Own To Update The Phone

Update preparation:

1. Backup Your Phone Click Here.
2. Your Phone’S Battery Should Be Charged 80% Of The Minimum.

3.Need Install Adb Driver Link Install Mtk Loader Driver Link

4.Enable usb debugging Go

  1. Settings > About Phone > Build number > Tap it 7 times to become developer;
  2. Settings > Developer Options > USB Debugging.

4. Let Your Computer Must Correct Power Backup.

5. Download Tool And Firmware
6. Read All The Steps, And Then Do It Carefully.

Download Flash Tool Lollipop Firmware


Fastboot Adb Tool

Flash Tool-Link1/Link2

Firmware Lollipop-Link

Pass Zip File If Need-Moulnisky


Now Follow The Steps

First Extract All Zip Files To Desktop

Unlock Boot-loader 

Open Adb_drivers Folder From Desktop Open Command Promote By Click Shift+Mouse Right Button Click Command Prompt – Open Cmd Here 

Now Power Of The Phone Press Volume Up And POWER Then Press Volume Up,select “FASTBOOT”, press VOLUME DOWN TO Confirm

fastboot A1


Connect Your Phone Via Use Cable To Pc Install Driver If Need

Now Type Bellow Commands

fastboot devices

fastboot oem unlock
Press Volume Up In Your Phone To Confirm

fastBoot -w


fastboot reboot
Now You Have Unlocked The Bootloader Now You Ready To Install Lollipop Official Update 

Now Open Flash Tool Sp_flash_tool_v5.1352.01 Or Latest Folder And Run Flash_tool.Exe

Click On Scatter-Loading And Go To Software Folder > Select Scatter File From Rom Extracted Folder

a1 lollipop


Don’T Select Other Options, Handset May Dead With Below
Mota Siu Like
Format All + Download

Select  Firmware upgrade

If Handset Flashing Not Succeeded With Firmware Upgrade, Please Try Download Only Option

CanvasA1 Lollipop

Now Select Download Button
And Switch Off The Phone
Insert Battery Connect Usb Data Cable

If Not Start Press Volume Up Then Put The Usb Cable 

Now You Have Installed Lollipop On Your Phone

Like And Shre The Post And Dont Forget To Like Our Fb Page (Sharing = Caring ;)) Please Report To Our Fb Page If Any Link Are Dead Link

You might also like