Root Install Twrp On Your Amazon Kindle Fire

235

Root Install Twrp On Your Amazon Kindle Fire

Amazon-Kindle-Fire-root

 

Disclaimer: In No Way, We Have A Responsibility, If You Brick Your Phone Or SD Card Dead Or Your Phone Is Not Working Properly. It Is Your Sole Responsibility And Your Own To Get The Phone Root Privileges

Root of preparation:

1. Backup Your Phone Click Here.
2. Your Phone’S Battery Should Be Charged 80% Of The Minimum.
3. Let Your Computer Must Correct Power Backup.
4. Read All The Steps, And Then Do It Carefully.

Root Install Twrp On Amazon Kindle Fire

  • First Download Kindle Fire Tool From The Link Given Above, And Use Zip Decompression Operation.

 

[sociallocker]

Kindle_Fire_Utility_v0.9.3.zip

Link1/Link2

[/sociallocker]

 

 

  • Double-Click The File To Install Install_drivers.Bat Kindle Fire’S USB Driver.
  • Connect Your Device To Your PC.
  • Kindle Fire Now File Open Utility Unzipped Folder, Open Run.Bat File.
  • Kindle Fire Application Tools Will Start, And In The State Of The ADB Is Set To Online.
  • Root Device Now Press Option 3 (Install A Permanent Root Superuser).
  • Congratulations, Your Equipment Will Now Take Root, And Will Give Superuser Privileges.
  • Now Install TWRP You Need To Select “Install The Latest TWRP Recovery.”
  • Now, Your Equipment Will Be Installed TWRP Recovery.
  • Now Select The “Start” Mode, Press The Option 1.
  • Press 1 Again And Your Device Will Boot Normally.
  • Congratulations, You Now Have A Rooted Kindle Fire Amazon Install TWRP Recovery.

Precautions

If In An Extreme Case, Your Device Can Not Start, And Stuck A Yellow Triangle Appears, Then You Should Follow These Steps
Select “Start Normal” In The Kindle Fire Application Tools.
Wait For It To Act.
After That, Hold The Power Button For About 20 Seconds Until The Device Is Closed.
When It Is Fully Closed, You Should Turn On The Power, Now Boot Properly.
Remember, If In Case Your Device Stuck In Yellow Triangle, Then You Should Not Unplug Your Device, As Long As It Is Plugged In, And Make Sure That “Light” Of The Text In Windows Drivers.

Comments