Rooting Your Device May Result In Loss Of Warranty.
You Can Only Cause Further Responsibility By All Loss And Damage Equipment. In Any Case, We Will Not Take Any Responsibility.
- Before Beginning Any Further Ensure That Your Device Is Charging More Than 70%, Although The Root Before We Recommend A Complete Charging Equipment.
- Read All The Steps, And Then Do It Carefully.
- Let Your Computer Must Correct Power Backup.
Backup Your Device:
Not Really Necessary, But Better To Be Safe, Then Sorry. Backup Is Always Recommended.
Download Required Files:
[sociallocker]1. MT6592 Scatter file and TWRP Recovery Click here to download
2. Driver for Micromax and Mediatek Device: Click Here To Download
3. Update-SuperSU-2.1.zip file Click here to download[/sociallocker]
Root and install CWM/TWRP recovery:
Step 1: Install drivers in your PC (If you feel any problem in install driver then watch this video Click here) and Enable USB Debugging on your Phone. Go to Settings >>> Developer options >>> USB debugging check it .After then switch off your phone.
Step 2: Download SuperSU File And Copy In Your Phone’S Memory Card. Download CWM Recovery And Spread Your Phone Files And Extract The Files Where You Want The Folder. SP Extract And Open Tools. Sptool.Exe Run As Administrator.
Step 3: You Will See An SP Tools Window, Click Tools In The SP Scatter-Loading Options. Then You Will Get What You Ask Dispersed Location Of The File On Your PC, The New Label SP Tools. Now Select “Android_scatter_emmc.Txt” File. See This Image.
Step 4: Now Connect The PC Via The USB Cable Switch Off The Phone (Make Sure Your Phone Is Turned Off).
Step 5: SP tool to detect your phone and the process will begin. If S bite o01 not recognize / detect your phone, then install the driver VCOM read this article and it will help you to click here (drivers already in the phone flash drive, if you do not have these drivers and then install it)
Step 6: Now Starts Flashing On Your Phone To Install The Recovery.
Note: Do Not Interrupt This Process, Because It Might Brick The Device. To Ensure That No Power Outage Occurs.
Step 7: After the process is complete, a green ring will appear.
Step 8: Do Not Activate The Phone. Press And Hold The Volume. Up And Down + Power Button, Then Select “Recovery Mode” (If You Do Not Touch The Work, And Then Use The Volume Up And Down Keys To entering The Button And The Power Button Down Menu)
Step 10. Click on install button/ choose install and select SuperSU-v2.01.zip file from your save location on your SD card and install this file. Now reboot your phone.
More Root Guide – Root Micromax A99 Canvas Xpress
Micromax A300 Roms – OCT Os Lollipop Rom For Micromax A350 & Micromax A300
If you feel any problem then watch this video click here.