Guide To Root Samsung Galaxy J1 Verizon SM-J100VPP

Guide To Root Samsung Galaxy J1 VerizonSM-J100VPP. Follow up the guide to Root Samsung Galaxy J1 Verizon.

By Abhishek Last updated Aug 2, 2018

Guide To Root Samsung Galaxy J1 Verizon SM-J100VPP. This guide helps you to root Samsung Galaxy J1 Verizon SM-J100VPP. This mobile can’t be rooted easily in its locked firmware. So we have to download the old firmware and flash it VIA Odin.

Short Info About Samsung Galaxy J1 Verizon:

Samsung launched Samsung Galaxy J1 Verizon in January 2015. It launched with the 1.2Ghz dual-core processor. The J1 Verizon comes with 4.3 inch HD 800 pixels by 480 pixels TFT display. J1 Verizon Powered by dual-core processor 512MB of ram. About the storage, it has 4GB of internal memory Expandable up to 256GB. About the camera, Samsung Galaxy J1 Verizon has 5 – megapixel dual back camera and 2 megapixel front for selfies. J1 Verizon is running on a 1850mAh removable battery.

The new device launched with bloatware only rooted phone user can remove this bloatware. So root your Galaxy J1 Verizon SM-J100VPP. Just follow the simple procedure. These steps are little different than earlier posts of Samsung devices. Because This mobile can’t be rooted easily in its locked firmware. So we have to download the old firmware and flash it VIA Odin.

Supported Devices:-

Samsung Galaxy J1 Verizon SM-J100VPP

Preparation:-

Charge Your Device.
Backup Phone Apps, Contacts, SMS.
Enable developer options.

Go To Settings -> About Phone -> Tap On “Build Number” 7 Times To Enable Developer Options.

Enable USB Debugging.

Go To Your Settings -> Developer Options -> Tick The “Usb Debugging” Checkbox.

Enable OEM Unlock.

Go To Your Settings -> Developer Options -> Tick The“Oem Unlock” Check box

Install Samsung USB Driver Link->.
Download Latest Odin Tool From Here->-.
Read Guide.and Root Samsung J1 Verizon.

Recommended for You:

Rootable_Old_firmware.tar.md5

How To Root Samsung Galaxy J1 Verizon Guide with Rootable Old Firmware

Download Odin And Unzip Odin-v3.*.* and Twrp.tar.md5 file.
Run Odin3 vx.xx.exe.
Switch Off Your J1 Verizon.
Turn Your Phone Into Download Mode By (Volume Down + Home + Power buttons)

Press Volume Up to acknowledge the warning Then Phone Will Turn Download Mode

Connect Your Phone With Pc Via USB
Odin Will Detect Your Phone
That Is, Check The Ap Box, Add The Firmware File. (Do Not Extract It)
Check Auto Reboot And F.Reset Time Options.
See The Screenshot.

Now, Click Start Button To Begin The Installation Process.

The phone will be auto reboot After booting download King root App.

Let the app run, and done your phone is now rooted. 😀

If any problem comment below. 🙂

Source XDA