Unlock Bootloader Guide For Honor 3c (H30-U10) By SP Flash Tool
Since huawei honor3c (h30-u10) international version with locked bootloader. It is always recommended that anyone who wants to try Chinese KitKat firmware on your device should get their phone’s bootloader unlock first, avoid soft masonry. In this article, i have a simple step-by-step tutorial on how to use the good ol ‘sp flash tool security unlock bootloader.
Disclaimer: This Post Or Processing Technology Has Been Through Extensive Testing 3c Developers Honor, But I Still Will Not Be Held Responsible Brickwork / Failing Device At Any Point. Your Continued Entirely At Your Own Risk!
Prerequisites:-
- Honor 3c [H30-u10] International Device.
- Full Backup Current System Using Mtkdroid Tool.
- Stock Android 4.2.x Version Jelly Bean Firmware.
- Usb Cable And The Latest Drivers MTK Driver.
Downloading:-
Complete Step-By-Step To The Instructions:-
- Install The Required Mtk USB Drivers.
- Unzip Sp Flash Tool.zip On Your Pc
- Unzip Honor3cbootunlock.zip On The Computer.
- Execute “FlashTool.exe” On The Computer.
- Click The “scatter-loading“, Then Select “MT6582_Android_scatter” File Is Placed In The “Honor3CBootUnlock” Folder.
- Click On The Window Menu, Check The “write Memory“. A New Tab Named Write Memory Should Appear.
- Write Memory Tab, Click To Open The Original Data And Select “preloader_huawei82_wet_jb5.bin“.
- Set The Memory Is Set To “EMMC“, The Start Address Is Set To as “0x800” And Container Length “0x1B0EC“. Finally, Click On The Write Memory Button.
- Go To The Download Tab, Click On The “download” Button. Make Sure You Have Disconnected The USB Cable. Check The “DA DL All With Check Sum” Option.
- A Download Warning Message Should Pop Up, Click “yes”.
- Reconnect The Phone In Meta Mode By Connecting It To Pc Via Usb Cable And Power Without Its Battery Inserted. Wait A Few Minutes Until Complete.
