Download Honor 10 Service Firmware and Install Guide
Download Honor 10 Service Firmware for unbricking The device and back to stock rom. The Service Firmware required for unbrick Honor 10 from hard brick it also installs stock rom if you have installed custom rom or others mods. In this post, we have shared all the Honor 10 firmware from all religion. The Service Firmware is an update.app file it can be updated via Huawei three button recovery. So here is all the links for Honor 10 Service Firmware with update method.
Huawei has stopped sharing the firmware link of new Huawei and Honor Device it only Available on Huawei service center. But 4pda Members uploaded all the firmware of Honor 10 you can rescue your device with this Service Firmware if your device is bricked by installing apps, Rom’s and rooting. Here is the list of Huawei Honor 10 Service Firmware Download Links, if your model not on the list, please comment below we will upload it for you.
Available Service Firmware:-
COL-L29 220.127.116.11 (C10, C461)
Download Huawei Honor 10 Service Firmware
How To Install Service Firmware on Honor 10
1. First Check OEM Vendor Version Dial *#*#2846579#*#* to access the ProjectMenu menu, choose Network Information Query>Vendor Country Info, and verify that the country and carrier.
2. Download Service Firmware as your device model and OEM and unzip it with 7zip or Winrar.
3. Create a New folder on SD card or USB-OTG and re-name the folder name to “Dload”.
4. Copy update_sd.zip file and COL-**_hw_** folder from Service Firmware Dload folder to Sd card “Dload” folder.
Normal Update Method
- Dial *#*#2846579#*#* to access the ProjectMenu menu, choose Software Upgrade>SDCard Upgrade, and touch OK.
Force Update Method
1. Completely Switch Off The Device.
2. Hold Volume Up + Volume Down + Power Button and Release the key when the update start.
3. Once the update is done switch on the device and do a full factory reset from Setting -> Backup & Reset.
Install customized data package File
1. Once the main package update_sd.zip flashing done now install customized data package.
2. Copy update_sd_***hw_**.zip to Dload Folder.
3. Dial *#*#2846579#*#* to access the ProjectMenu menu, choose Software Upgrade>SDCard Upgrade, and touch OK.
Note:- Some Service Firmware comes with Update.app file so copy Update.app file instead of Zip file.