Download Latest Xiaomi Flash Tool 2019 and User Guide

Xiaomi one of the Best Android Smartphone brand from 2017 to 2019, they have both flagship and Mid-Range Android Phones. Xiaomi device used Qualcomm and MediaTek both chipset on their device’s. As Samsung, Xiaomi also has Flashing tool like Samsung Odin. With Xiaomi flash tool you can flash Xiaomi Mi and Redmi devices, Unbrick Xiaomi devices, Update Xiaomi Devices.

MI Flash Tool helps you to Recover your device form the hard brick if you have flashed wrong Stock and Custom Rom. Mi flashtool this tool also update your device new Android Version Android 7.0, Android 8.0. The tool supports All new and old Xiaomi device. Here we have shared the mi flashtool
Download link and how to use it.

What’s Xiaomi Mi Flash Tool?

XiaoMiFlash tool is developed by Xiaomi Inc that permits the user to Flash firmware on their Xiaomi devices. With mi flashtool, user can Upgrade or Downgrade Firmware. The Tool also helps you to Unbrick Xiaomi Device from Hardbrick and Softbrick. Mi Flash is an instrument developed by Xiaomi programmers to flash Stock Firmware/ROMs on Xiaomi devices. The user can flash Firmware with two methods one is via fastboot or EDL mode, you can download fastboot rom from Xiaomi official website for flash mi device via fastboot or EDL mode.

Supported Devices:-

Xiaomi MI and Redmi Qualcomm and Mediatek chipset phones. Mi flashtool also support other Qualcomm chipset phones Android Phones Like ZTE, Lyf, Nubia Etc.


  • First, charge your device for interrupted flashing.
  • Backup device apps, Messages, Contacts, Gallery you can use Dr.Fone – Recover (Android) for that.
  • Disable driver enforcement on Windows 8/10 pc for install EDL driver.
  • XiaoMiFlash requires NET Framework runtime on your pc so first install latest NET Framework to run XiaoMiFlash.exe.
  • fastboot/Qualcomm QDL Driver must be installed on your pc Because this tool will use Qualcomm QDL mode to recover your MI device.
  • Required 7zip for unzip fastboot rom.
  • Download the tool and read the guide.

MI Flash Tool 2019 Changelogs:-

-v20185280 For the process output delay, the process exits.
The checkpoint information and cannot get the problem fix.

Download Mi Flash Tool Latest Version

Mi Flash Tool VersionDownload Link
(Latest) MiFlash
MiFlash Setup 20174250MiFlashSetup_eng.msi

Xiaomi Flash Tool User Guide

1. Read Prerequisites do basic requirements make sure you have Disabled driver enforcement and installed fastboot and QDL Driver.

2. Download mi flash and Install latest xiaomi flash tool on your windows pc (New version just unzip it). Run XiaoMiFlash.exe and install the driver from “driver” tab.

XiaoMiFlash driver install

  • Click “Install this driver software anyway” when windows security popup promoting for install.

3. Now download and unzip fastboot rom for your device from Xiaomi official site. First, extract the tar file then unzip the fastboot rom with 7zip.

xiaomi fastboot rom unzip

4. Browse fastboot rom by click on select then navigate to the fastboot rom folder.

miflash tool browse rom

5. Once you have browsed the rom folder Connect your phone in EDL or fastboot mode. To save internal storage and user data select save user data from the bottom or select clean all for complete flashing.

How to enter EDL mode:- Switch off the phone and hold Volume up + Down + Power then connect the USB cable. Or first, turn your device into recovery mode by Volume Up + Power then tap Download mode.
 How to enter fastboot mode:- Switch off the phone and hold Volume Down + Power then connect the USB cable.

6. When device id is showing on xiaomi flash tool click flash to start flashing. Wait few minutes to complete the flashing when it’s done XiaoMiFlash promotes finished.

mi flash tool flash done

Watch How To Flash Xiaomi Firmware with MIflash

If you have like the guide share the post to forums, Comunity, Reddit, Quora, etc. and help others. Comment below for any help and ROM Download Link.

You might also like