Download Qualcomm HS-USB QDLoader 9008 Drivers & Install Manually

If you are trying to install Qualcomm Drivers or Qualcomm HS-USB QDLoader 9008 Drivers, then this post may help you to install Qualcomm HS-USB QDLoader 9008 Drivers properly. This driver is comfortable with 32-bit and 64-bit CPU architecture or any Windows 7, 8, 8.1, and 10 operating systems. You will need to install this driver to connect your Qualcomm device in EDL Mode or Download Mode. Download Qualcomm HS-USB QDLoader 9008 Drivers from below and follow the steps to install it manually.

For some reason, if you want to back in stock firmware or unbrick your dead Qualcomm device, then Qualcomm drivers must be installed on your PC. There are many ways to install stock firmware or unbrick your device. While some support it through the fastboot commands, others like Xiaomi, Samsung, LG, Sony have a dedicated software for it. But to connect the phone with this software first connect to the PC with a USB cable, and when the USB drivers adequately connected between the phone and USB, then the transfer process starts.

Qualcomm Drivers

If you are trying to flash Stock ROM with QFil Tool or want to unbrick dead any Qualcomm device, then Qualcomm drivers must be installed on your pc. Nowadays, most of the smartphone comes with Qualcomm chipset. This driver is required for any Android devices since they come with a Qualcomm Chipset like Oneplus, Xiaomi, Realme, Samsung, LG, Motorola, Lenovo, etc.

Don’t worry about it, here we share two deferent easy methods of installing these Qualcomm Drivers. The first method is a Direct Installation using the Setup Wizard. The second method has manually installed the driver into the Device Manager.

Pre-requirements:

If your device is working, then only follow the second step, either skip this step if your device is dead.

Download and install the ADB and Fastboot Tools on your PC.
Enable USB debugging on your device.
If you are using Windows 8 or later versions, you need to disable Driver Signature Enforcement.

Download Qualcomm HS-USB QDLoader 9008 Driver 64-bit & 32-bit

There are two versions of the driver available for download; you need to download only one driver based on your installation method.

For Automatic and Direct Install:

For Manually Install:

How to Install Qualcomm HS-USB QDLoader 9008 Drivers

As mentioned, there are two steps to install these Qualcomm Drivers. The first one is too much easy to install; it is automatic and direct install. We recommended you to follow the first step usually. If the first method doesn’t work on your PC, then follow the second step, in this method, you need to install the driver fully manually. Both methods are briefly described below:

Method 1: Automatic and Direct Install

Download the Qualcomm 9008 Driver 32-bit & 64-bit setup file based on your CPU’s architecture.
Extract the downloaded zip file to a folder on your computer.
Now Run “QDLoader_HS-USB_Driver_64bit_Setup.exe”. (Must check you CUP’s architecture)
A popup screen will show, click on the “Next” option.

Then select “I accept the terms in the license agreement” and then click “Next.”

After that, click on the “Install” button to install Qualcomm HS-USB QDLoader 9008 drivers on your Windows PC.

Once the installation is completed, click on the ‘Finish‘ option to exit the Installation Wizard.

That’s it. The Qualcomm Drivers are now successfully installed on your computer. Now you can customize your Android device.

Method 2: Manually Install

Download the Qualcomm Drivers zip file.
Extract the downloaded zip file to a folder on your computer.
Connect your Android device to PC using a USB cable.
Go to the ADB and Fastboot folder and open cmd windows, thereby “Shift + Mouse Right” and click “Open command window here” option.
- You can also open it by Open command prompt and type cd ADB and Fastboot Folder location command.
Type the below command to boot your device to EDL mode:
Now go to Control Panel > Device Manager on your PC.
In Device Manager: you will see your device listed as QHUSB_BULK under the Other devices section, along with a yellow exclamation mark. (It mean your pc don’t recognize your device.)

Right-click on it and click select “Update device software.”
Click on ‘Browse my computer for driver software‘.

Now select the Qualcomm drivers folder and click on “Next.“

At this point, Windows Security Popup may come, click “Install this driver software anyway.”

Once the driver installed and PC recognized your Phone, then the device will be shown as Qualcomm HS-USB QDLoader 9008, and there will be no yellow exclamatory signs.

You’re done!

Hope this guide will help you to install Qualcomm HS-USB QDLoader 9008 Drivers on your computer, now you can flash any ROM in EDL or through tools. If you face any problem during installation, please comment below we will be happy to help you.