Guide To Change DPI Without Root On Galaxy S7/S7 Edge

Guide To Change DPI Without Root On Galaxy S7/S7 Edge

Galaxy S7S7 Edge DPI gizdev

The New Samsung Galaxy S7/S7 Edge Is Powered By 1.6GHz Octa-Core And It Comes With 4GB Of RAM. The Phone Packs 32/64GB Of Internal Storage Which Can Be Expanded Up To 200GB Via A sd Card. The Phone Comes With A 5.1 Inches Display With A Resolution Of 1440 X 2560 Pixels . As Far As Cameras Are Concerned, The Samsung Galaxy S7 Comes With A Back Camera Of 12 Megapixels A Font 5 Megapixels Selfie Camera.The S7 Runs Android 6.0 (Marshmallow) Up gradable And Is Powered By A Non-Removable Li-Ion 3000 MAh Battery.

Screen Density Is One Of The Parameters Used To Distinguish The Monitor Is Completely Different From The Resolution Of The Screen. Samsung Galaxy S7 / S7 Edge With A 2K Display And 640 DPI (Dots Per Inch) Screen Density. We Use Third-Party Applications Can Easily Change The Screen Density Galaxy S7, But Most Of Them Need Root Access On The Device. Today, We’Ll Show You How To Change DPI Without Root On Galaxy S7/S7 Edge. But Change Can Sometimes Cause The Application DPI Scaling Problems, But 560 DPI On S7 / S7 Is Reportedly Great Work.

Prerequisites :-

  • Install Samsung USB Drivers ⇒ Here
  • Download ⇒ Here & Unzip It.
  • Enable Usb Debugging

Settings > About Phone > Build Number > Tap It 7 Times To Become Developer;
Settings > Developer Options > Usb Debugging.

  • Need Your Device At Least To 70% Charge, As The Process May Take A While.

Guide To Change DPI :-

  • Turn Your Phone Fastboot Mode By (Hold Volume Down + Power ) And Plug Into PC.
  • Now Open Command Prompt On  Latest-Fastboot-Adb-Tool Folder By Shift + Mouse ⇒ Open Command Windows Here 
  • Type Or Paste This Command To Verify Your Phone Detected
adb devices
  • Type Or Paste This Command To Set The Screen DPI To The Desired Value.
adb shell wm density DPI_Value && adb reboot

Note:- Replacing the desired DPI value in place of DPI_Value .

  • Your Device Automatic Reboot When The Process Is Complete.
  • If You Want To Restore The Changes, Use The Below Command.
adb shell wm density 640 && adb reboot
  • Now, the device will restart , DPI will be reset to 640.

If Any Problem Please Comment Below….. simple smile simple smile simple smile

You might also like