If you are trying to install MTK Preloader Driver or MediaTek MT65xx USB VCOM Drivers, then this post may help you to install MTK USB Drivers properly. This driver is comfortable with 32-bit and 64-bit CPU architecture or any Windows 10, 8.1, 8, and 7 operating systems. You will need to install the latest Mediatek Drivers on your PC/Laptop properly to connect your MTK devices with SP Flash Tool. Download MTK USB Drivers from below and follow the steps below to install it manually.
MTK Preloader Drivers help to connect your smartphone with your computer for stable connection and better data transfer. If you want to back in stock firmware or unbrick your dead Mediatek device, then the latest MediaTek drivers must be installed on your PC. There are many ways to install ROM or unbrick your device. While some support it through the Fastboot commands and another one is SP Flash Tool. But to connect the phone with this software first connect to the PC with a USB cable, and when the USB drivers adequately connected between the phone and PC, then the transfer process starts.
MTK USB Drivers
You can flash any Stock Firmware or custom ROM, Root and install Recovery using the SP Flash Tool on a MediaTek processor device. It helps the device to connect correctly with the computer without any errors or failures during the installation process. This driver is required for any Android devices since they come with a Mediatek Chipset.
Features of MediaTek USB Drivers
Now we describe some useful features of the MediaTek USB Drivers for your MediaTek device. Most of the functions must know before installing the driver on your device.
Secure & Stable Device Connection
You can connect your device with the computer to transmit data from the phone to the computer and vice versa as well. Before making connections between the computer and the device, enable the USB Debugging option from the device Settings > Developer options. This will create a Secure and Stable connection between your both connected devices, and it reduces the errors or disconnected issues.
IMEI Flashing
Sometimes, while writing the IMEI number with the help of SN Write Tool, the MTK VCOM or CDC driver cannot detect the MediaTek device. However, you can quickly solve all those issues, completely re-installing MTK USB Driver.
Flashing Firmware:
If your device has a boot loop or not turn on the display and you want to fix these issues to unbrick your device. Then you must be flash or install stock firmware using MTK Flashing Tool. In that case, MTK all drivers allow you to connect the device to the computer.
Download MTK USB All Drivers
| MTK USB Driver Version | Download Link |
|---|---|
| MTK_USB_All_v0.8.0.zip | Download |
| MTK_USB_All_v0.8.2.zip | Download |
| MTK_USB_All_v0.8.4.zip | Download |
| MTK_USB_All_v0.9.0.zip | Download |
| MTK_USB_All_v0.9.2.zip | Download |
| MTK_USB_All_v0.9.7.zip | Download |
| MTK_USB_All_v1.0.1.zip | Download |
| MTK_USB_All_v1.0.4.zip | Download |
| MTK_USB_All_v1.0.8.zip ~ (Latest) | Download |
Pre-requirements:
- This guide is only for the MediaTek processor.
- Charge your device, a minimum of 50%.
How to Install MTK USB Drivers on Windows
- Download the latest MTK USB All Driver setup file for your PC.
- Extract the downloaded zip file to a folder on your computer.
- Now Run “MTK_USB_All_vxxx.exe”.
- A popup screen will show, click on the “Next” option.
- Then select “I accept the terms in the license agreement” and then click “Next.”
- After that, click on the “Install” button to install MTK Preloader drivers on your Windows PC.
- Once the installation is completed, click on the ‘Finish‘ option to exit the Installation Wizard.
That’s it. The MTK Drivers are now successfully installed on your computer.
How To Fix MTK USB VCOM Driver
If in case, the Windows can’t detect your device and you are facing on MediaTek MT65xx USB VCOM Drivers issue. Then follow the below guide, here we will show you how to fix MTK USB VCOM Drivers problems with a simple method.
Download MediaTek MT65xx USB VCOM Drivers
Install MediaTek MT65xx USB VCOM Drivers
- Download the MT65xx_USB_VCOM_DRIVERS.zip file.
- Extract the downloaded zip file to a folder on your computer.
- Connect your Android device to PC using a USB cable.
- Now go to Control Panel > Device Manager on your PC.
- In Device Manager: click “Action” option and select “Add Legacy Hardware” option
- You will see a pop-up screen, you will be welcomed with add legacy screen.
- Now click on the Next option.
- Then select “Install the Hardware that i manually select from a list” and click next.
- After that select “Show All Device” and hit “Next” button.
- Now select “Have Disk” then click “Browse” option and select any .inf file extracted file.
- Once you select the .inf files and click Open When you see a security warning on which you can select Install Anyway.
- Once installation complete, Restart your computer.
- You’re done!
If you have benefited from this article – MTK USB Driver, then please share it with other communities and forums. Don’t forget to join our telegram group for more wallpapers, Themes, Ringtones Update – https://getdev.me/telegramdev.
