Easy Way to Install TWRP 3.0 and Root Redmi Note 3 SD

1 1,110

Install TWRP 3.0 and Root Redmi Note 3 SD1x1.trans - Easy Way to Install TWRP 3.0 and Root Redmi Note 3 SD

We already posted how to unlock bootloader Redmi Note 3 method and twrp installation method. but this time we found a tool to install TWRP 3.0 and Root Redmi Note 3 SD Easy 1 click. Twrp recovery need for installing custom ROM exposed framework.

About Xiaomi Redmi Note 3: –  The smartphone was Launched in November 2015. The phone comes with 5.5 touchscreen inches with a resolution of 1080 by 1920. The phone is powered by 1.8 GHz hex-core Qualcomm Snapdragon processor 650 and comes with 2 GB of ram. Note 3 phone packs 16gb of internal storage which can be expanded up to 32gb. The Xiaomi Redmi Note 3 comes with the main camera of 16 megapixels on the back and a front  5 megapixels for the selfie. Xiaomi Redmi Note 3 runs Android 5.1 and is powered by a non-removable battery 4050 mah.
The Xiaomi Redmi note 3 is a dual phone sim (CDMA and gsm, 4G) that accepts micro-sim options nano-sim connectivity and include wi-fi, GPS, Bluetooth, FM, 3g, 4g.Sensors on the phone include a proximity sensor, ambient light sensor, accelerometer, and gyroscope.




Backup Phone Data.

  • You Need To Unlock Bootloader To Do This Here Full Guide – Link.
  • Enabled USB Debugging.

Go to settings on your phone. Then click on About Phone > Now Tap 7 Times on MIUI version. This will Enable Developer Options On your Phone. Now Go back to Main settings Menu. Click on Additional Settings > Developer Settings > Enable Usb Debugging.

  • Install ADB Driver Mi Driver Link ->.
  • Driver Signature Must Be Disabled in Windows 8,10.
  • Download The Tool and Super-Su Zip.
  • Read Instructions.
Also Read  [ROM] Resurrection Remix_5.5.8 Android 5.1.1 Optimized Custom Rom For Mi 4i

⇓⇓Download Twrp 3.0 Tool Super- Su⇓⇓



Guide To Install Twrp 3.0:-

1 -> Download and Unziptwrp_3.0_tool_redmi_note_3.zip“.

2 -> Turn Off your phone and turn it to Fastboot mode by (Volume Down + Power).

3 ->Connect Your Phone To Pc.

4 ->Go to unzipped folder.

5 -> One more time turns your phone into Fastboot mode and flash twrp run “Twrp.bat.”


1x1.trans - Easy Way to Install TWRP 3.0 and Root Redmi Note 3 SD

6 ->Read Instruction in cmd windows then HIT Enter to install Twrp 3.0.

7 ->After installing twrp recovery phone will turn into twrp recovery

Ticked Mount system partition read-only, otherwise you will not get the OTA updates for the Official ROM .

1x1.trans - Easy Way to Install TWRP 3.0 and Root Redmi Note 3 SD



Guide To Root Redmi Note 3 SD:-

  1. Download “BETA-SuperSU-v2.71.zip” and copy it to the root directory on your phone.
  2. Turn off your phone. Turn on Your Phone Into Fastboot Mode By Hold (Volume Up + Power).
  3. Go To Install Navigate To “SuperSU-v2.71.zipSwipe To Install.
  4. Back Reboot.

1x1.trans - Easy Way to Install TWRP 3.0 and Root Redmi Note 3 SD

Check Root Access With Root Checker


1x1.trans - Easy Way to Install TWRP 3.0 and Root Redmi Note 3 SD

Read Also -> 

How to Install Xposed Framework on Redmi Note 3 without Twrp

  1. RedmiNote3Pro says

    thanks a lot…….. this method works

    i had global stable rom with unlocked bootloader. i downloaded twrp_recovery.img from official site and flashed via fastboot flash recovery command and tried so many times to boot to twrp recovery but always it booted to the stock recovery of global stable ROM.

    with your method i successfully booted into twrp and flashed SuperSU & got root access. though yet with usual method (Vol up + Power) i can not boot into twrp as it is being replaced by the stock one, i am planning to perform your method again and this time shall flash cyanogenmod 13 and fix this once and for all

Leave A Reply

Your email address will not be published.