This guide helps you to Unlock bootloader of Lenovo K6 Power, Root Lenovo K6 Power and installing twrp recovery. First, you need to unlock the bootloader to do this. This guide also helps you to flash twrp recovery on Lenovo K6 Power.
Lenovo launched Lenovo K6 Power after success in K5, September 2016 Lenovo launched K6 power with Snapdragon 430 processor. Lenovo still used Android 6.0 marshmallow in K6 power, but they will release the Android Nought shortly. The Lenovo K6 Power comes with 5.0 inch HD 1080 pixels by 1920 pixels Full Hd display. Lenovo K6 Power Powered by Snapdragon 430 processor 1.4 GHz octa-core processor 3GB of ram. About the storage, it has 32GB of internal memory Expandable up to 128GB. About the camera, K6 Power 13 – megapixel dual back camera and 8-megapixel front for selfies. The Lenovo K6 Power is running on Android 6.0 Vibe UI and is a 4000mAh Non-removable battery.
New Lenovo Android phones now released with the locked bootloader so also K6 Power launched with the locked bootloader. This device can’t be rooted or other customization first you need to unlock the bootloader. The new device launched with bloatware only Root Lenovo K6 Power user can remove this bloatware. Twrp recovery will help you to install custom ROM’s mods viper4android, Xposed framework, and other mods.
Preparation:-
- Charge Your Device.
- Backup Phone Apps, Contacts, SMS.
- Enable developer options.
Go To Settings -> About Phone -> Tap On “Build Number” 7 Times To Enable Developer Options.
- Enable USB Debugging.
Go To Your Settings -> Developer Options -> Tick The “Usb Debugging” Checkbox .
- Enable OEM Unlock.
Go To Your Settings -> Developer Options -> Tick The“Oem Unlock” Check box
- Install Lenovo ADB Fastboot Driver -> Link.
- Download and unzip “K6 Power Unlock TWRP-3.0.3.0.zip“.
- Read Guide.
Supported Devices:-
- K33a48/a42/b37/b36
You Might Also Like :-
V4A + DOLBY ATMOS + SONY AUDIO + BEATS AUDIO Audio Mod
⇓⇓ Download K6 Power Unlock – Twrp -Tool Super-Su⇓⇓
K6 Power Unlock TWRP-3.0.3.0.zip
SuperSU-v2.79-201612051815.zip
Instruction To Unlock Bootloader Of Lenovo K6 Power:-
1.) Read Preparation.
2.) Download “K6 Power Unlock TWRP-3.0.3.0.zip” unzip it.
3.) Connect your phone to Pc via USB.
4.) Go To BootLoader Unlock folder and run “Unlock_Bootloader.bat“.
5.) The phone will auto reboot and wait for processes done.
Instruction To Install Twrp 3.0 On Lenovo K6 Power:-
1.) Read Preparation.
2.) Download “K6 Power Unlock TWRP-3.0.3.0.zip” unzip it.
3.) Connect your phone to Pc via USB.
4.) Go To TWRP folder and run “Flash-TWRP.bat” for Permanent. Run “Run-TWRP.bat” for install temporary to root the device.
5.) The phone will auto reboot and wait for processes done.
Note: – When you first start TWRP set the system mode to Read Only ! because of stock firmware Secure Boot is enabled by default, so any changes made to the system partition lead to a boot loop.
Instruction To Root Lenovo K6 Power
- Download and Copy “SuperSU-v2.79-201612051815.zip” to Your phone root
- Turn off your phone.
- Turn on Your Phone Into Recovery Mode By Hold (Volume Up +Down + Power).
- Or Turn On Recovery Mode By ADB Command
adb reboot recovery
- Go To Install Navigate To “SuperSU-v2.79-201612051815.zip” & Install.
- Reboot & Enjoy
To Install Xposed Simply Install Xposed Installer apk Open Xposed Framework -> Install Updates Wait For Complete.
Like Shre Comment Bellow For any Help 🙂